Security & Alarms

image of security cameras East Kent Electrical can offer a full range of security solutions from base Alarm systems through to systems that will automatically dial your phone or mobile to alert you to an activation. We can also offer CCTV solutions from Analogue to high end systems. All systems can be recorded and accessed over the internet. Support pages and also be catered for with remote support to on site.

Security Lighting

Most properties today have security lighting. We offer lighting services from the change of a lamp to a comprehensive system of outdoor lighting controlled by movement sensors. Both halogen & sodium lighting systems are available.

We can install all types of security lighting currently available - we have catalogues available offering a wide choice. We will carry out a free survey & quotation on request.

There are many different security lighting systems from a single light with a built-in sensor to multiple light & sensor installations with a central control panel & sounders.

There are also systems with sensors that control single lights or multiple lights to illuminate parts or the entire exterior of a property.

Security lighting can also be energy efficient with the use of low energy lighting sources eg sodium, metal-halide or fluorescent lighting.

Accreditations

Government guidelines state that a Registered Installer should carry out all electrical installation work in a domestic dwelling to comply with BS7671 standards.

In industrial & commercial premises, the Electricity at Work Act & (BS7671) require work to be carried out by competent persons & tested with certification issued on completion.

Smoke Detection

A fire strikes when you least expect it, often during the night. It also spreads very rapidly, but the real killer is smoke. If you are asleep when a fire starts and you don't have a smoke alarm to wake you, your chances of surviving are zero.

Over 80% of all the deaths that occur as a result of fires, happen in the home and you are twice as likely to die in a fire at home if you haven't got a working smoke alarm. In addition to this, the risk of being killed or injured by a fire has been estimated at more than 10 times likely in Houses of Multiple Occupation (HMOs). Section 67 of the Housing Act 2004 states it is a mandatory requirement that mains smoke alarms are installed in HMOs and are maintained in a proper working order.

Why do we need smoke detectors?

Smoke alarms can detect fires at their earliest stages - and then sound a loud warning to alert people so that they can escape from a burning building. Detectors have been used in hotels, factories and offices for many years, often because their use is a required part of the building's fire precautions as laid down in the Fire Precautions Act of 1971. Only in the last 10 years have smoke alarms become commonplace for the home.

The 1991 Smoke Detectors Act, requires that all new houses that have been built since 1992 must, by law, have a mains smoke detector installed with the minimum requirement being one smoke alarm on each level of the building. This is not a piece of legislation aimed specifically at residential letting property, but aimed at all new buildings. If an agent installs smoke alarms into properties that he manages or they already exist, care must be taken in ensuring that it is clear from the letting agreement who is responsible for the maintenance of the detectors including testing and battery replacement. Silence on this matter could mean that the landlord or agent is responsible, and in the case of a fire could be held liable for being negligent in their duties.

The BS 5839: Part 6 British Standard that deals with fire alarm systems in dwellings was amended in 2004 and recommends that the choice of detector should take account of the type of fire that may be expected and the need to avoid false alarms. The standard now recommends that in new build properties heat alarms should be installed in kitchens and the 'principle habitable room' e.g. the living room, in addition to any smoke alarms used in the escape routes.

Benefits of the service

East Kent Electrical install and maintain a variety of smoke alarms. Smoke alarms incorporating either an ionisation or an optical sensor are available in mains only, mains with Alkaline battery back-up, or mains with rechargeable Lithium back-up formats. Strobe light and vibrating pad alarms are available for the hard of hearing or the deaf. The pad is placed under a mattress or pillow and when smoke is detected, the alarm will sound and set off the light and pad. Radio linked alarms can also be installed so that when one detects a fire, they all sound.

To ensure that alarms are in good working order and the possibility of any unrevealed faults are identified, East Kent Electrical recommends preventative measures be taken to ensure the continual reliability of the system. All manufacturers of smoke alarms recommend that their products are replaced after 10 years use and it is recommended that a system is serviced four times a year.

East Kent Electrical choose to use Ei Aico mains smoke detectors because of their reliability and have installed these in residential properties throughout the UK and manage the maintenance/ battery replacement. All detectors installed are placed on our maintenance contact with detectors being inspected regularly to ensure that they are operating correctly.